SimSightline / Fanatec GT DD Pro Settings
Fanatec GT DD Pro Settings
The Gran Turismo DD Pro is mostly used for GT7 on PS5. Here are Fanatec's official GT7 settings, two popular alternatives, what changed with FullForce and GT7 update 1.71, and settings for F1 25 and PC sims.
Fanatec GT DD Pro GT7 settings (official)
Open the Advanced Tuning Menu: press the tuning button, then hold it for 4 seconds. Use the base in PS5 mode, not compatibility mode.
| Tuning menu | Value | GT7 in game | Value |
|---|---|---|---|
| SEN (rotation) | Auto | Force feedback max. torque | 5 |
| FF (strength) | 100 | Force feedback sensitivity | 1 |
| FFS (scaling) | Peak | Countersteering assistance | Off |
| NDP (natural damper) | 38 | ||
| NFR / NIN | Off / Off | ||
| INT (interpolation) | 2 | ||
| FEI / FOR / SPR / DPR | 100 / 100 / 100 / 100 |
Fanatec's recommended GT7 settings for the 5 Nm and 8 Nm (Boost Kit 180) GT DD Pro, from Fanatec's forum. Fanatec says to use the tuning menu and in-game values together. Some 8 Nm owners find Max Torque 5 light; raise it a step while the wheel still gets heavier in fast corners.
- Auto Setup: instead of setting values by hand, choose Auto Setup ("AS") in the tuning menu to apply Polyphony's values.
- Per car: fast race cars (Gr.3, Gr.1) produce more force; drop Max Torque a step if the wheel goes flat in quick corners.
Full GT7 method and other wheels: GT7 wheel settings.
Popular alternative GT7 setups
| Setting | Fanatec (official) | Doughtinator (cleaner) | Sammysnake Racing (GT7 1.71) |
|---|---|---|---|
| FFS | Peak | Linear | – |
| NDP | 38 | Off | 25 |
| NFR | Off | Off | 15 |
| INT | 2 | 2 | – |
| FullForce (FUL) | – (predates FullForce) | – | 50% |
Doughtinator's published settings (SEN Auto, FF 100, Linear, NDP/NFR/NIN off, INT 2, FEI/FOR/SPR 100) and Sammysnake Racing's video for GT7 1.71 (August 2026). "–" means not given. Less damper (NDP) gives more detail but can oscillate on straights.
FullForce and the GT7 1.71 problem
- FullForce came to the GT DD Pro and CSL DD with Fanatec App 1.5.1.2 (June 2026); the FUL setting controls its strength.
- GT7 update 1.71 reworked physics and turned on FullForce for the DD Pro. Some owners then had force feedback loss, fast oscillation or the base shutting down. Fanatec's first advice was to lower FUL.
- Fix: Fanatec App 1.5.4.1 (September 2026) includes a firmware hotfix. The Fanatec App is Windows-only, so PS5 owners need a PC to update. After updating, reset FUL to 100 and test.
From GTPlanet's reports (June and September 2026).
Fanatec GT DD Pro F1 25 settings (PS5)
- In F1 25: Vibration & FFB strength 80, On track 30, Rumble strip 30, Off track 15, Wheel damper 3, Maximum wheel rotation 360°.
- Tuning menu: SEN 360, FF 100, FFS Peak, NDP 35, NFR off, NIN off, INT 3, FEI 100, FOR 100, SPR 100, DPR 100.
Fanatec's F1 25 settings for the CSL DD and GT DD Pro. More in our F1 25 wheel settings.
GT DD Pro on PC (iRacing, ACC, LMU, AC EVO)
On PC the GT DD Pro behaves like the CSL DD: same 5 or 8 Nm motor and tuning menu. Use the values in our Fanatec CSL DD settings for iRacing, ACC, Assetto Corsa, AC EVO, LMU and AMS2. With an Xbox-licensed Fanatec wheel it also works on Xbox.
GT DD Pro 5 Nm vs 8 Nm (Boost Kit)
The GT DD Pro gives 5 Nm with its standard power supply and 8 Nm with the Boost Kit 180. Fanatec's GT7 values are the same for both. Since the FullForce firmware, holding torque on the Boost Kit rose from 6 to 8 Nm, and the Peak and Linear scaling options were removed on Boost Kit setups. Is 8 Nm enough? For GT7, yes; see our direct drive guide for stronger PS5 bases such as the ClubSport DD+.
FAQ
What are the best settings for the Fanatec GT DD Pro?
For GT7, Fanatec's: SEN Auto, FF 100, FFS Peak, NDP 38, NFR and NIN off, INT 2, FEI, FOR, SPR and DPR 100, with Max Torque 5 and Sensitivity 1 in game. Or use Auto Setup in the tuning menu.
What are the recommended settings for Fanatec DD wheels?
SEN Auto, FF 100 and FFS Peak as a base, NDP 15 to 40 depending on the game (higher in GT7 and F1), NFR and NIN off, INT 1 to 6, and FEI, FOR, SPR and DPR 100.
Does the Fanatec GT DD Pro have FullForce?
Yes, since Fanatec App 1.5.1.2 in June 2026. GT7 enabled it with update 1.71; if the base oscillates or shuts down, install the Fanatec App 1.5.4.1 hotfix or lower FUL.
Is the Fanatec GT DD Pro worth it?
For GT7 on PS5, yes: it is an officially licensed Gran Turismo direct drive wheel, 5 Nm (8 Nm with the Boost Kit), and it also works on PC. Compare it with other PS5 wheels in our PS5 wheel guide.
What are the best GT DD Pro settings for F1 25?
Strength 80, On track 30, Rumble strip 30, Off track 15, Wheel damper 3, rotation 360°, with SEN 360, FF 100, Peak, NDP 35 and INT 3 on the base.
What are the best Fanatec CSL DD settings for GT7?
The CSL DD itself is not PlayStation-compatible; GT7 owners use the GT DD Pro, the PlayStation version of the same 5 or 8 Nm base. Fanatec's GT7 values apply to both: SEN Auto, FF 100, Peak, NDP 38, INT 2, with Max Torque 5 and Sensitivity 1 in game.
Should I use PS5 mode or compatibility mode in GT7?
PS5 mode. Fanatec says compatibility mode is not the right mode for the GT DD Pro in GT7.
Sources: Fanatec: GT7 recommended settings; GTPlanet: GT DD Pro gets FullForce; GTPlanet: hotfix for GT DD Pro issues in GT7; Fanatec: F1 25 recommended settings; Doughtinator: Fanatec GT DD Pro wheel settings; Sammysnake Racing: GT DD Pro settings for GT7 1.71 (YouTube). Last reviewed October 2026.